Using the Wired Microphone

Using Wired Microphone

1. Turn the amplifier ON:  Press the button in the lower right area of the amplifier so that it is IN.  The meter above the switch should be illuminated.

2. Set the microphone volume: Turn the BLACK knob in the upper, left corner of the amplifier CLOCKWISE until the ridge on the knob matches the mark on the amplifier face.

3. Turn the microphone switch ON to talk.  OFF when not in use.

Turning Sound System Off

THE ORDER OF THE FOLLOWING STEPS IS NECESSARY TO PREVENT STATIC NOISE.

1. Turn OFF the WIRELESS microphone volume: Turn the RED knob in the upper, left corner of the amplifier COUNTER-CLOCKWISE until it stops.

2. Set the WIRELESS microphone switch to OFF: Set switch to end position nearest large wire connected to the top.  The red light on top of the unit should go out.  PLEASE BE SURE TO TURN THE WIRELESS UNIT OFF TO CONSERVE BATTERY LIFE.

3. (Optional) Turn the amplifier OFF:  Press the button in the lower right area of the amplifier so that it is OUT.  The dial above the switch should not be illuminated.

NOTE:  It is not necessary to turn down the WIRED microphone or MASTER VOLUME controls.  IT IS BEST IF YOU LEAVE THEM AT THEIR PROPER SETTINGS.